Rebel9 pro (economy, value and window) – SHARKOON Rebel9 Pro Window User Manual
Page 14
Advertising
REBEL9 PRO (EcOnOmy, vaLuE and windOw)
9. Installation of an add-on card
1. Remove the slot bezel’s fixation screw and take away the slot bezel (fig. 21).
fig. 21
2. Insert the add-on card into the mainboard’s respective slot and fix it to the case by
re-attaching the fixation screw (fig. 22).
fig. 22
10. The pre-installed fans (Value and Window Edition only)
1. The pre-installed 120mm fans provide a 4-pin PSU connector and a 3-pin mainboard plug
each.
2. Connect one of both plugs to either the respective PSU or (to control the fan speed via the
mainboard) the matching mainboard connector.
Advertising