SHARKOON Rebel9 Pro Window - Manual (Page 7)

REBEL9 PRO (EcOnOmy, vaLuE and windOw)
Bottom view
A – Case feet
B – Air intake for PSU
Note:
For more information on how to install the intended devices, refer to their respective
documents.
4. Installation of a mainboard
1. Open the case by loosening the thumb screws on the case’s back side and removing the left
side panel. Lay down the case sidewise on an even surface.
2. The mainboard’s mounting panel inside the case provides various drillings to fix the
stand-offs (fig. 1).
fig. 1
The mainboard contains special screw openings (fig. 2).
fig. 2
A A
A A
B