SHARKOON 8-Bay RAID-Station - Manual (Page 18)

8-bay raid station 18
5. When the system is damaged in LARGE mode, is it still possible to read the data?
No. The system is different from a RAID; the entire disk cannot be read.
11. Appendix
11.1. CLEAN mode
Function: In CLEAN mode each hard drive is displayed separately as one drive.
Notes:
When using a SATA host controller, CLEAN mode should only be used if the SATA host
controller provides Port Multiplier (PM) support. If a host is not PM-aware, only a single
drive is displayed (drive 1).
The CLEAN mode will not delete the drives partition if the drives were used as single
drive before.
