SHARKOON 5-Bay RAID-Station - Manual (Page 25)

5-bay raid station 25
7. Insert the HotSpare drive into the fourth HDD bay (fig. 44).
Fig. 44
8. Switch on the device to complete the RAID mode setting (fig. 45).
Fig. 45
9. Rebuilding a redundant or HotSpare drive
The 5-BAy RAID STATION duplicates all data to separate drives in order to protect against
data loss due to drive failure in CLONE, R1, R3, R5, and R10 MODE.
The following example illustrates the procedure of rebuilding a redundant or HotSpare
drive.
