ShelterLogic 10471 RatchetTite Anchor Kit - Manual (Page 3)

05-10471-OA Page 3
Locate anchor as close as possible to base foot of
rib and place the pointed end of the Easy Hook in
the ground.
For best results, use an anchor in each corner
of the shelter, then distribute balance of anchors
evenly for the sides of the structure. Attach
anchors to legs only. DO NOT attach the anchors
to the cross rails.
Using drive rod, drive the Easy Hook into ground until base loop is at ground level. The Easy Hook Anchor
must be set properly to ensure maximum strength.
sTep 2:
sTep 1:
Quantity Description of Parts:
Ratchets 4
Ratchet Webbing with Hooks 4
EasyHook Anchors 4
Small Drill Guide 1
Large Drill Guide
36" Drive Rod
1
1
NOTE: Review all parts included in the kit.
pARTs lIsT