Spreader assembly instructions, Model sd-95/sd-95ss – SnowEx SD-95SS User Manual
Page 6
Advertising
© Trynex International 2011 (REV A) F50714
6
Spreader Assembly Instructions
Model SD-95/SD-95SS
Step 1: Insert Rod end into gate slide and lock in place with hair pin clip and washer as shown (see figure 2).
Step 2: Assemble upper handle assembly to main frame (see figure 1), simultaneously insert rod into upper handle as
shown (see figure 3).
Step 3: Attach clear protective cover to hopper.
figure 2
figure 3
figure 1
Advertising
This manual is related to the following products: