Operating the spreader, Model # sd-95/sd-95ss – SnowEx SD-95SS User Manual
Page 7
7
© Trynex International 2011 (REV A) F50714
Operating the Spreader
Model # SD-95/SD-95SS
SPREADER LOADING
WARNING - Do not overload spreader. Use chart below to calculate weight of material are an average for dry
materials.
Material Weight Per Cubic Ft.
Rock Salt 80 - 90 lbs.
WARNING - Never remove spreader spreader from vehicle with material in it as this could cause damage to the
frame assembly.
WARNING - Never leave materials in hopper for long periods of time as salt is hygroscopic and will attract
atmospheric moisture and harden up.
SPREADING TIPS
• Use care when operaterating spreader near pedestrians.
• Spread ice melters with the storm to prevent unmanageable levels of ics.
• Adjust material flow by rotating the cam wheel to either increase or decrease gate slide movement, see below.