Tennsco Q-Line Shelving Closed User Manual
Page 6
Advertising
18.
For added strength, place two
1
/
4
-20 x
5
/
8
"
bolts and nuts (available locally) through each
corner of each shelf, and into the small holes
of the upright.
19.
If more than one unit is to be
used in a row, assemble a
new unit end, and then
connect this new end to the
existing unit (which you
already built with the proper
uprights if you followed the
instructions in step 4) with a
top and bottom shelf. After
the end is connected, you
can then insert the back by
bending it slightly and
wedging it between the posts
and the shelves. Once the
back is in place, you may
insert the remaining shelves.
Advertising