Tennsco Q-Line Shelving Closed - Manual (Page 8)

REF.
NO. PART NO. DESCRIPTION
1a Offset Angle Post OAP-hh 7 Optional Front Base Strip FBS-ww2
1b Beaded T-Post BTP-hh 8 Optional Label Holder LH-ww
1c Heavy Duty Beaded Post HBP-hh --- Optional Hinged Door & Frame HD-3687
2 End Panel EP-ddhh --- Optional Bin Dividers BD-ddhh
3 Back Panel BP-wwhh --- Optional Bin Front BF-wwh
4 Shelf Clip T-1--- Optional Foot Plate FP-1
5a 22 gauge steel shelf** Q2-wwdd --- Optional Sliding Divider SD-ddhh
5b 20 gauge steel shelf** Q-wwdd --- Optional Shelf Box BX-wwdd
6 1 / 4
-20 x 5 / 8
" bolts and nuts -------
REPLACEMENT PARTS
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, replacements may be obtained directly from
Tennsco. To obtain proper replacement parts, follow the instructions below:
l
l
l
l
l
l
l
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Description of part(s) needed and part Purchase Date
number(s) as shown in Parts List (above) Your company name
Color (i.e. Medium Grey, etc.) Contact person's name
Was item missing, or was it damaged? Who the product was purchased from
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Voice: (800) 251-8184 Fax: (800) 722-0134
If requesting parts by telephone, ask for customer service and have as much of the above information as possible.
End Panel
(Ref. No. 2)
Shelf Clip
(Ref. No. 4) Steel Shelf
(Ref. Nos. 5a, 5b)
Optional
Front Base Strip
(Ref. No. 7)
Offset Angle
Post
(Ref. No. 1a)
Optional
Label Holder
(Ref. No. 8)
REF.
NO. DESCRIPTION PART NO.
BASIC UNIT PARTS OPTIONAL ITEMS
Beaded
T-Post
(Ref. No. 1b)
Heavy Duty
Beaded Post
(Ref. No. 1c)
Back Panel
(Ref. No. 3)
*Where the suffix "ww", "dd", or "hh" is used in the part number, the width (ww), depth (dd) or height (hh) is substituted in
the part number. For example, for an 87" high Offset Angle Post, the part number would be OAP-87.
**In order to tell whether your shelves are 22 gauge or 20 gauge, look for a diamond-shaped hole on the end flange of
shelf. If the hole is there, your shelf is 20 gauge. Be sure to check both ends, as this indicator is only found on one end.