Tennsco Q-Line Shelving Open - Manual (Page 6)

17. For even better reinforcement, place two
1 / 4
-20 x
5 / 8
" bolts and nuts (available locally)
through each corner of each shelf, and into
the small holes of the upright.
18. If more than one unit is to be used in a row, bolt a pair of upright posts to the first unit with 1 / 4
-20 x
1" bolts and nuts. (Note that where BTP or HBP posts are used, two units will share one post.) The
pair of side braces on the first unit becomes a common pair for the two units.
Two new
upright posts
Side sway
braces are
shared by
both units.