Triangle Engineering of Arkansas COMFORT AIDE - Manual (Page 4)

Page 4
Under Eave Vent
1
Roofcap
Roof Ridge
Ventilator
Louvers
(Rectangular &
Triangular)
2
Turbine Ventilator
(12" throat)
3
4
5
A
A
B
B
A
B
A
A
B
Type QTY. A (ft.) B (ft.)
NET FREE
AREA (sq. ft.)
LOSS
FACTOR
NET VENT
(sq. ft.)
=
x x x x
1
2
3
4
5
OTHER FORMS OF VENTILATION
TOTAL NET FREE EXHAUST AREA
(sq. ft.)
.5
1
.13
.6
.6
The following diagram is provided so you may deter-
mine the existing ventilation in your attic. It is necessary
that you provide adequate ventilation to meet the mini-
mum exhaust requirements for the fan you have selected.
Should you calculations show your exhaust area is inad-
equate, additional ventilation must be provided. Failure
to meet minimum exhaust requirements will result in a
reduction of fan efficiency and motor failure.
VENTILATION REQUIREMENTS
Min. Free
Exhaust
Model Area Req’d
CA 2421 7 sq. ft.
CA 3021 9 sq. ft.
Specifications subject to change without notice.
IMpORTANT!
WhEN
ORdERINg REpAIR
pARTS:
Always give the
following information:
1. Model No. and
Serial No. of fan
2. Part Description
3. Part Number
LIMITEd FIvE YEAR WARRANTY
do not return product to original place of purchase
Triangle Engineering of Arkansas, Inc. (Manufacturer) war-
rants, from the date of purchase, to the original purchaser
only, that the product manufactured by Manufacturer is free
from defects in material and workmanship for a period of
FIVE (5) YEARS. Motors, capacitors, v-belts and switches are
excluded from this warranty, but shall have a limited one year
warranty from date of purchase to the original purchaser.
If a failure of the product occurs, contact the Manufacturer
at: 1-800-255-9014 and give the model number of the prod-
uct, the purchase date, and a description of the problem to
the customer service agent.
Once the problem is diagnosed, and proof of purchase date
is verified, Manufacturer will have the option of shipping the
necessary repair part(s) to the Customer, freight prepaid or
having the product returned to Manufacturer for repair or
replacement. If the product is returned to the Manufacturer,
Customer is responsible for prepayment of all inbound
freight charges. Upon repair or replacement, which shall be
at the discretion of Manufacturer, the Manufacturer will pre-
pay all outbound freight charges for the return of the product
to the customer. However, if Manufacturer finds product to
be in operating condition and no problems are diagnosed,
product will be returned to customer freight collect.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF.
Except as provided by this express warranty, the goods are
sold “as is” without any implied warranties.
This limited warranty does not cover labor to replace warran-
tied parts or motors, nor does it cover failure of the installer to
provide adequate ventilation to meet minimum exhaust require-
ments, damage resulting from accident, misuse or abuse, lack of
proper maintenance, improper installation, affixing of any parts
or attachments not authorized by Manufacturer, or loss of parts.
In no event shall Manufacturer be liable for any special, inci-
dental, or consequential damages; which may result from any
defect in material or workmanship.
It is expressly understood that Buyer’s sole and exclusive
remedy shall be repair or replacement of defective parts,
and that Triangle Engineering shall not be liable for injury to
persons or property. Should the goods prove so defective,
however, as to preclude the remedying of warranted defects by
repair or replacement, the Buyer’s sole and exclusive remedy
shall then be a refund of the purchase price.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.