Triton 9610 Operation Manual - Manual (Page 143)

TRITON SYSTEMS, INC. 5-101
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
F
UNCTION
: PRIMARY NUMBER
F
ACTORY
D
EFAULT
: NONE
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose MORE.
4.) Select TRITON CONNECT.
5.) Choose PRIMARY NUMBER.
D
ESCRIPTION
:
The PRIMARY NUMBER function is used to enter the number that
the terminal can use for calling back the Triton Connect Host Com-
puter.
When this function is selected, the current phone number is dis-
played (if nothing appears on the screen, no number is set). Se-
lect CHANGE to blank the current entry, and then enter the de-
sired phone number. The phone number may be up to 30 digits
long. It can also contain a dialing prefix, such as a ‘9’ for an out-
side line, if necessary. If you need to pause after the prefix, place
a comma in the number for a two-second delay at that point. Press-
ing the <BLUE> key first, then the <0> key, followed by the <RIGHT
ARROW> key to select the comma character. Make sure to enter
the long distance prefix ‘1’ if you are dialing an 800 number or a toll
long distance number. Do not enter dashes in the number.
E RROR C ONDITIONS ::
There are no error conditions directly associated with this function.