Triton 9610 Operation Manual - Manual (Page 50)

TRITON SYSTEMS, INC.
SECTION 5 - MANAGEMENT FUNCTIONS OPERATION MANUAL - MODEL 9610
5-8
F
UNCTION
: SCHEDULE CLOSE
F
ACTORY
D
EFAULT
: OFF
A CCESS I NSTRUCTIONS :
1.) Select CLOSE from the MANAGEMENT FUNCTION screen.
2.) Select SCHEDULE CLOSE.
D
ESCRIPTION
:
NOTE: ATM Software Version 4.0 (or later) is required to support
the Schedule Close function.
This function allows you to turn on or off the SCHEDULE CLOSE
feature. It also provides access to the CHANGE SCHEDULE func-
tion, which allows you to specify the time of day when a CLOSE
process will be automatically initiated (if the SCHEDULE CLOSE
feature is turned ON). When the feature is turned OFF, the close
procedure must be initiated manually.
The current state of the SCHEDULE CLOSE feature is shown as
either ON or OFF in the label on the left-hand side of the display.
Press the button next to this label to toggle the state of the feature
between ON and OFF.
The close information will be written to the Electronic Journal, al-
lowing it to be printed out, or retrieved by a remote computer
equipped with Triton Connect software (version 3.0 or later). Day
Close reports initiated by this function will not be printed by the
receipt printer.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.