Triton MAKO 2000 Operation Manual - Manual (Page 173)

6-3
T
RITON
S
YSTEMS
, I
NC
.
S
ECTION
6 - M
AINTENANCE
M AKO C ASH D ISPENSER O PERATION M ANUAL
R
EPLENISHING THE
R
ECEIPT
P
APER
NOTE:
This operation can be completed with the
AC Power applied to the Terminal
1. This operation can be completed with the
power on. Open the top of the Terminal by
unlocking the top enclosure and pulling the
hinged door forward.
2. Remove any paper that remains in the pa-
per path as follows:
a. If paper remains on the roll, cut the pa-
per between the roll and the printer with
a pair of scissors as shown in Figure 6.2.
Use the RECEIPT PRINTER PAPER
FEED BUTTON to feed the paper
through the paper path until all paper
comes out the front of the printer.
NOTE:
Do not pull the paper backward through
the printer. This may leave paper frag-
ments that can cause paper jams.
Figure 6-2. Cut any paper between the roll and
the printer feed path with scissors.
Figure 6-3. The PAPER FEED BUTTON.
FEED BUTTON