ADT Security Services K5309V2 - Manual (Page 22)

– 22 –
3DQLF.H\V
8VLQJ3DQLF.H\V
Your system may have been programmed to use special keys to manually activate
emergency (panic) functions as follows:
This Function Sends this signal* With This Sounding…
Silent Alarm silent alarm no audible alarm or any visual display
indicating that a silent alarm has been
initiated.
Audible Alarm audible alarm a loud, steady alarm at touchpad(s)
and at any external sounders that
may be connected.
Personal Alarm auxiliary alarm steady alarm sound at touchpad(s),
but not at external bells or sirens.
Fire Alarm fire alarm temporal (pulsing) sound at external
bells and sirens.
*All panic functions send signals to the Customer Care Center, if connected.
To activate a Panic Function:
Press and hold down for at least 2 seconds whichever
lettered key on the touchpad has been programmed for
the desired emergency function.
OR
Press both keys of the assigned key pair at the same
time.
(-7%61)(
6)%(= 83 %61
English Display: READY
Typical Panic Display:
%0%61
English Display:
99 and ALARM
A
B
C
D
6160ADT
-50-002-V0
ARMED
READY
1 2 3
4 5 6
7 8 9
0 #
STAY
BYPASS
CHIME INSTANT
AWAY
CODE
TEST
OFF
READY
6160ADT
-50-003-V0
PRESS BOTH KEYS
OF DESIRED PAIR
AT THE SAME TIME
ARMED
READY
1 2 3
4 5 6
7 8 9
0 #
STAY
BYPASS
CHIME INSTANT
AWAY
CODE
TEST
OFF
READY
ZONE 96 ZONE 95
ZONE 99
Lettered Panic Keys Panic Key Pairs
See your installer and use the chart provided in the Features Programmed in Your
System section to note the functions that have been programmed for your system.