Additel Land User Manual - Manual (Page 18)

18
Chapter 8 Ports Configuration
8.1 Possible communication problems
? Be sure the cable is connected to the calibrator properly, and to your PC's serial port as well. Consult your calibrator's documentation for the
correct method of connection.
? Programs that use a serial port to connect to other external devices, such as Palm Pilots, should be shut down when using this program with that
same serial port. The computer needs to recognize that the COM port is free, and can be used for communication with the calibrator device.
8.2 Procedures
To communicate with the calibrator, you need to configure the port settings by clicking the “SerialPort” box of the Setting Menu on the of the HOME
SCREEN.The SerialPort Screen will be shown(see figure 8.2 below ). After completing that, you could manually build the connection by clicking the
“Connect” button on the left top of the HOME SCREEN.
Figure 8.2