Additel PCal User Manual - Manual (Page 13)

- 12 -
UUT Management: The UUT Management allows user creating, editing,
exporting and deleting the data associated with all gauges in the UUT Management
List. You can search the Gauges by the gauge’s properties from the search button.
The UUT information and History Calibration Data are displayed under the UUT List.
The UUT Management also allows user to create new calibration procedures,
start calibrations, building certificates, show calibration data and delete calibration
data.
New Calibration: Please consult this function in Calibration Wizard section
As Left Calibration: You can execute a new As Left Calibration or load the As
Found Calibration data. Refer to the As Found Calibration for the detailed
information.
Build Certificate: Please see the function of Certificates for Build Certificate.
Calibration Data: Shows the Calibration Data selected.
Delete Calibration Data: You can delete the calibration data which you choose.
References
A reference is the digital pressure gauge to which the gauge under test is
compared during a calibration.
Management: The reference management allows user creating, editing,
exporting and deleting the data associated with all references in the reference List.