Additel PCal User Manual - Manual (Page 17)

- 16 -
Profiles: The profile editor provides access to all test profiles stored in the
database. The profile detail box is used to create a new profile when a new model is
created using the new gauge wizard.
Specify the Pressure Range of the test profile. To create a uniform series of
pressure points, click on Default Mode. Specify the number of Up/Down points and
the Up/Down Cycles. The test points will be filled in automatically. To create a
non-uniform series, click on Customer Mode. Any points that are already listed will
remain. Selecting a point to delete or clicking the button to add (insert, edit) a point.
In this section, you can choose default mode or custom mode. In the default
mode you can only change the number of points and number of cycles.
You can define the set points by your demand.