Aquametrix AM-LDO Luminesescent Dissolved Oxygen - Manual

Features
• No moving parts
• Very rugged
• Instantly stable values
• Calibrated in the factory with calibra-
tion data stored in sensor
• Direct output via 4-20 mA or Modbus.
• Only 1 replaceable part - sensor cap.
• Not affected by CO
2
or H
2
S
• Economically Priced
100 School Street
Andover, MA 01810
978-749-9949
Toll free - 855-747-7623
www.WaterAnalytics.net
Applications
• Wastewater treatment
• Sewage
• Boilers
• Fish farms
• Aquaculture
by
Water Analytics
AquaMetrix
by
Water Analytics
AquaMetrix
Aquametrix has been selling polarographic dissolved
oxygen analyzers for over three decades. We are now
pleased to be able to offer an optical dissolved oxygen
sensor that outputs directly a 4-20 or Modbus signal. Op-
tical DO sensors offer advantages over electrochemical
DO sensors in that they are inherently self-referencing,
require no warm-up period, do not require flow and are
less affected by fouling.
Maintenance is trivial. The sensor cap lasts for an industry
leading 3 years or longer and is inexpensive to replace.
The body is corrosion resistant and designed to stand up
to the harsh environment of wastewater.
No sensor on the market packs as much into one small
package. Plug into your PLC or computer and you’re
ready to measure.
Descriptions
AquaMetrix AM-LDO
Luminescent Dissolved Oxgyen Sensor
with 4-20 mA or Modbus Output