Connecting a camera to a server – Avigilon ACC Standard Client Version 4.12 User Manual
Page 25
Setup
17
Figure A.
Find Camera dialog box: IP Address
Figure B.
Find Camera dialog box: IP Address Range
o
Search From Server: select the server that you want the camera to connect to.
o
Search Type: select a search type.
o
Camera Type: select the camera's brand name.
Tip:
Select ONVIF to discover cameras that are ONVIF complaint.
o
IP Address/Hostname: (For IP Address search only) enter the camera's IP address or
hostname. The camera and server’s gateway IP address must be set correctly for the
camera to be found.
o
Start IP Address and End IP Address: (For IP Address Range search only) enter the
start and end IP addresses. Only addresses in that range will be searched for the
selected camera type.
o
Control Port: enter the camera control port number.
o
Provide the User Name and Password for the camera if required.
3. Click OK.
If the camera is discovered, it will appear in the Discovered Cameras list. You can now connect the
camera to a server.
Connecting a Camera to a Server
Once the camera has been discovered on the network, it can be connected to the server.