Avigilon ACC Standard Client Version 4.12 - Manual (Page 82)

Avigilon Control Center Standard Client User Guide
74
Figure A.
Joystick dialog box
5. Set up an action for each button on the joystick:
a. Press a button on the joystick and the button label is highlighted in the Joystick dialog
box.
b. Select an action for the button from the drop down list.
c. Repeat this procedure for each button on the joystick.
6. Click OK.
Configuring an Avigilon Professional Joystick Keyboard
The Avigilon Professional Joystick Keyboard is a USB add-on that contains a joystick for controlling zoom
and pan within image panels, a jog shuttle for controlling the Timeline, and a keypad programmed with
the application's keyboard commands. Refer to
Keyboard Commands for the keypad commands that
control the application.
By default, the keyboard is installed in right-hand mode. Use the Joystick dialog box to configure left-hand
mode.
1. Connect the keyboard.
2. Right-click the local client in the System Explorer then select Setup to open the client Setup
dialog box.
For more information, see
Accessing the Client Setup .
3. Click Joystick.