Avigilon ACC Enterprise Client Version 4.12 User Manual
Page 124
Avigilon Control Center Enterprise Client User Guide
116
The PTZ Controls are displayed below the System Explorer. If the PTZ Controls are unavailable,
select an image panel that is displaying video from a PTZ camera.
Note:
The controls may appear different depending on the camera. Some options are
disabled or hidden if they are not supported by the camera.
Figure A.
PTZ Controls
2. To pan or tilt, perform one of the following:
o
Click the round Pan/Tilt arrow buttons in the PTZ Controls. The speed of the pan/tilt
movements can be adjusted using the Speed slider.
o
In the image panel, drag your mouse from center to move the camera in that direction.
The farther the cursor is from the center of the image panel, the faster the camera will
move.
o
If the camera supports Click to Center, click anywhere on the image panel to center the
camera to that point.