Avigilon ACC Enterprise Client Version 4.12 - Manual (Page 21)

Setup
13
Figure A.
Manage Server Connections dialog box
2. In the Find Server dialog box, enter the Hostname/IP Address, the Base Port, and
the Connection Speed of the server you want to discover.
Figure B.
Find Server dialog box
The base port is 50080 by default. You can change the base port number in the Avigilon Control
Center Admin Tool. See the Avigilon Control Center Server User Guide for more information.
Tip: Set the Connection Speed to WAN if you are on a low bandwidth network (for
example, internet or wireless network), and select LAN if you are on a high bandwidth
connection (for example, office or home network). This enables the Avigilon Control Center
to better manage your bandwidth and image rate.
3. Click OK.
If the server is found, the server will appear in the Manage Server Connections dialog box.
If the server is not found, check the following then try again: