Catskill Craftsmen 2008 - Manual (Page 10)

STEP 8
ASSEMBLE DRAWER
A. Attach the drawer back to the drawer sides with 1 1/4” #8 screws. Slide in drawer bottom, best side
up. Attach front using the Bastion System. Holes in the posts will be parallel to the long edge of the
drawer front. See illustration.
B. Attach the drawer glide to the drawer sides with 7/16” Pan Head #6 screws in the places indicated
in the illustration. Black plastic lever will face outward. Glide will be up against the back of the drawer
front.
Holes along the
bottom edge of the
drawer sides are not
used in this model.
STEP 9
fINAL STEPS
A. Upright unit. Slide drawer into bas. Glides will automatically lock into place.