Catskill Craftsmen 2008 - Manual (Page 7)

STEP 3
ATTACH THE BACK BRACE
AND BOTTOM SHELf
A. The Top Back Brace attaches 1 1/4”
down on the legs, allowing clearance for
the hinges and drop leaf supports. Attach
the back brace with bastions to the right
and left side assembly. Before tightening
the bastions, attach the back wine rack
brace, making sure the off-center pipe
holes are toward the top of the unit.
(See illustration 3B) Use two steel pins
for each side. After the back wine rack
brace is in position, tighten the top back
brace’s bastions. See illustration 3A.
B. Insert the metal wine rack pipes into
the back wine rack brace. Attach the front
wine rack brace to the left leg, off-center
pipe holes at the top, and insert the
metal wine rack pipes into position,
working left to right, finally attaching
the front wine rack brace to the right leg.
See illustration 3C.
C. While holding the wine rack in position,
attach the bottom shelf to the inside of all
four legs using the 1 1/4” #8 screws.
See illustration 3D.
Illustration 3B
Make sure the Pipe holes are positioned
off-center, toward the top for both the
front and back wine braces.
Illustration 3A
Illustration 3D
Illustration 3C