Airlink101 AGSW808POE - Manual (Page 2)

1
Power Over Ethernet (PoE) is an evolving technology designed to
simultaneously deliver power and transmit data through an Ethernet
cable. Modeling after the technology used in telecommunication
systems which supplies power to telephones, PoE powers network
device without the need of AC electrical outlets. By eliminating the
power cords and the power infrastructure, the technology greatly
simplifies the wiring and deployment matters and brings lots of
convenience and benefits in home, office, and industrial
environments.
Features
• 8
x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ45
with 8-Port PoE function
• Compliant with IEEE802.3af specification
• Support PoE Power Maximum 15.4W per PoE port
• Support PoE Powered Device (PD) classification
• Over-Current and Short-circuit Protection
• Each port supports auto MDI/MDIX, no need to use cross-over
cables or an up-link port
• Flow control fully supported:
- Half-duplex: backpressure flow control
- Full-duplex: IEEE802.3x flow control
• Provide non-blocking wire speed reception and transmission
• Embedded SDRAM for packet storage
• 1024-entry look-up table direct mapping mode
• Embedded 16-entry CAM for hash collision mapping
• Optional maximum packet length 1536/1522 Bytes
Purpose
This Quick Installation Guide tells you how to install your Switch and
how to connect it to your Ethernet network.
Terms/Usage
In this manual, the term “Switch” (first letter upper case) refers to your
8-Port 10/100/1000Mbps Switch with 8-Port PoE, and “switch” (first
letter lower case) refers to other Ethernet switches.
1. Introduction