Airlink101 AGSW808POE User Manual

Page 3

Advertising
background image

2

1.1 Package Contents

• 1

x

AGSW808POE

• 1

x

Switching

Power

Adapter

• 1 x Quick Installation Guide

• 4 x Rubber foot for shock cushioning


1.2 Panel

1.2.1 Front Panel

The picture below depicts the front panel of the PoE Switch:

Figure 1-1 Front Panel view of the Switch

PoE Ports (Port 1~8)
These ports are 802.3af PoE enabled ports, the PoE port will
automatically activate when a compatible terminal is identified. The
PoE switch will distribute power through the Ethernet ports to the
connected PoE device. For devices that are not compatible, the
PoE port will not supply the power to this device. This feature
allows users to freely and safely utilize the 802.3af PoE for Power
over LAN devices on the network. These ports support network
speeds of 10Mbps, 100Mbps and 1000Mbps, and can operate in half
and full-duplex transfer modes. These ports also support automatic
MDI/MDIX crossover detection, which give the PoE switch “plug and
play” capabilities. Just simply connect RJ45 network cable
between the PoE switch and the device and it will automatically
detect the settings of the device and adjust itself accordingly

Advertising