Edwards Signaling Genesis Chime User Manual

Genesis chime, Product information, Specifications

Advertising
background image

Installation Sheet

27MAY03

P/N: 3100561 REV: 1.0

Genesis Chime

1 / 2

Genesis Chime

Product information

The Genesis Chime is an audible fire alarm notification
appliance designed for indoor walls. See Table 1 for a list of
model numbers.

The chime includes field configurable jumper options for
selecting the desired dB output, steady or temporal chime
output, and constant non-coded voltage or single-stroke coded
voltage operation. A Genesis Signal Master is required when
chimes are configured for coded operation. See Table 2 for a
list of compatible synchronization modules.

Install this device in accordance with applicable requirements
in the latest editions of the NFPA codes and standards and in
accordance with the local authorities having jurisdiction.

Table 1: Model numbers

Model description

Model numbers

Chime,
white

ADTG1-C MG1-C

EG1-C

XLSG1-C

G1-C ZG1-C
G1-C-LG

Chime,
white, with FIRE marking

ADTG1F-C MG1F-C

EG1F-C

XLSG1F-C

G1F-C

ZG1F-C

G1F-C-LG

Chime,
red

ADTG1R-C MG1R-C

EG1R-C

XLSG1R-C

G1R-C

ZG1R-C

G1R-C-LG

Chime,
red, with FIRE marking

ADTG1RF-C

MG1RF-C

EG1RF-C XLSG1RF-C
G1RF-C

ZG1RF-C

G1RF-C-LG

Trim plate,
white

ADTG1T

MG1T

EG1T

XLSG1T

G1T

ZG1T

G1T-LG

Table 1: Model numbers

Model description

Model numbers

Trim plate,
red

ADTG1RT MG1RT
EG1RT

XLSG1RT

G1RT

ZG1RT

G1RT-LG


Table 2: Compatible synchronization modules

Model names

Model numbers

Auto-Sync Output
Module

SIGA-CC1S

SIGA-MCC1S

SIGA-CC1S-LG SIGA-MCC1S-LG

Signal Master
snap-on piggyback
(1-gang)

ADTG1M MG1M
EG1M

XLSG1M

G1M ZG1M
G1M-LG

Signal Master - Remote
Mount

ADTG1M-RM MG1M-RM
EG1M-RM XLSG1M-RM
G1M-RM ZG1M-RM
G1M-RM-LG

Note: Synchronization module requirements are determined by
your application

Specifications

Operating voltage

Regulated 16 to 33 Vdc, 16 to 33 Vfwr
This device was tested to the regulated 24 Vdc/fwr
operating voltage limits of 16 V and 33 V. Do not apply
80% and 110% of these values for system operation.

Operating current: See Table 2
Sound level output: See Table 3
Signals

Steady: 60 strokes per minute
Temporal: 3-stroke pattern
Coded: Maximum 60 strokes per minute

Operating modes

Non-coded: Continuous voltage
Coded: Single-stroke controlled by voltage

Default settings

Signal: Steady
Sound level output: High db
Operation: Non-coded

Wire size: 12 to 18 AWG (2.50 to 0.75 sq mm)
Compatible electrical boxes

North American 2-1/2 in (64 mm) deep 1-gang box
Standard 4 in square box 1-1/2 in (38 mm), 2-gang, or 4 in
octagonal with G1T or G1RT trim accessory

Operating temperature range: 32 to 120 °F (0 to 49 °C)
Operating humidity range: 0 to 93% RH
Agency listings: Meets or exceeds UL464 Seventh Edition for

private mode

Advertising