AGFA E20 - Manual (Page 13)

Chapter 1: Preparing the Scanner 13
Unlocking the Scanner
Before you start using the scanner, you first have to unlock it.
1 Place the scanner on a horizontal, flat surface and pull it carefully towards you until you can
see the locking screw at the bottom.
2 Rotate the locking screw in the direction of .
Your scanner is unlocked.
! Note: If you want to transport your scanner, you have to lock it. To do this, first connect the AC
adapter to the scanner so that its optical assembly moves to its home position. Then, rotate the
locking screw in the direction of and disconnect the scanner. Your scanner is now locked
and ready for transportation.
Caution : Make sure to install the ScanWise software before connecting the scanner to your PC or
Macintosh computer.