Fire-Lite IPDACT Configuration Setup Instructions - Manual (Page 7)

If the IPDACT is configured with factory settings the IP address for the IPDACT is
192.168.0.100 with mask 255.255.255.0. Configure the PC network interface with an
address pertaining to the IPDACT subnet which does not have any other network
device, i.e. any address 192.168.0.X with mask 255.255.255.0, where X is a value
between 1 and 254 with the exception of value 100 which is assigned to the IPDACT.
The procedure to configure the IP interface in a Windows XP
TM
is as follows:
1. Access Start\Control Panel\Network Connections in the PC.
2. With the right hand mouse button, select Explorer. Select ‘Local Area
Connection’. With the right hand button, select ‘Properties’.
3. The configuration screen that appears is as follows:
Fig. 9
4. Using the mouse, double click on ‘Internet Protocol (TCP/IP)’ and a window
appears where you can enter the IP address, mask and Default Gateway:
Dm379-Iv2 7