Fire-Lite IPDACT Configuration Setup Instructions - Manual (Page 9)

Fig. 11
The following window is shown should the PING command fail. Consequently, it will
be necessary to recheck the IP configuration for both the IPDACT and the PC.
Fig. 12
STEP 5
If both the IPDACT and the PC are connected to a hub or switch on the LAN, the
configuration for the PC’s IP address depends on whether there is a DHCP server on
the Local Area Network.
If there is a DCHP Server, you must configure the PC to obtain an IP address from
the Server. Please follow the following steps:
1. Access Start\Control Panel\Network Connections in the PC.
2. With the right hand mouse button, select Explorer. Select ‘Local Area
Connection’. With the right hand button, select ‘Properties’.
3. Click on ‘Internet Protocol (TCP/IP)’
4. Select the option “Obtain an IP address automatically”.
Dm379-Iv2 9