HT instruments HT4011 - Manual (Page 15)

HT4011
EN – 14
4.3.7. Temperature measurement in °C and °F
CAUTION
Do not put the temperature probe into contact with live surfaces. Voltages
higher than 30Vrms or 60VDC imply electrical shock hazard.
Fig. 8: Use of the clamp for temperature measurement
1. Select the Temp°C or Temp°F position.
2. Insert the K wire probe provided into input terminal V

CAPHz%Temp and COM
by means of the relevant adapter, respecting the polarity indicated in Fig. 8. The
display shows the value of temperature.
3. To use the HOLD function, please refer to § 4.2.