HT instruments HT4016 - Manual (Page 6)

HT4014-HT4016
EN - 5
2. GENERAL DESCRIPTION
This manual is referred to two models: HT4014 and HT4016; the difference between the
models is fundamentally the capacity of the first to measure the frequency and of the latter
to measure DC current and to perform relative measurements using the ZERO function.
Where not expressly indicated the characteristics are common for both models.
The apparatus can perform the following measurements:
• AC
current.
• AC
voltage.
• DC
voltage.
• DC current (HT4016 only).
• Resistance.
• Frequency (HT4014 only).
• Continuity
Test.
• Diode test (HT4014 only).
Each of these parameters can be selected by means of an 7-position rotary switch,
including an OFF position. There are also the following keys: “D-H”, “R-H / , “MAX/MIN”,
“ ”, “
Ω/ ” and “ZERO”. For their use please see paragraph 4.2. The selected quantity
appears on a high-contrast display with indication of measurement units and functions.
Instrument have the possibility to show measurement values with an analogical bargraph.