HT instruments HT9022 - Manual (Page 40)

HT9022
EN - 38
WARNING
When a recording is in progress, if the selector switch of the clamp is moved
to any other position, the recording shall be interrupted. In the memory, you
will find the values stored up to that moment.
While recording, the display shows the message “Log” and keys
F2
(Par) and F4 (Fnz) are active, which give the possibility of
displaying the parameters or enabling the functions seen in the
previous paragraphs.
Mod Par Sys Fnz
A C 5 0 . 0 H z
2 1 . 4 7
k W
7 . 6 8
k V a r i
2 2 . 9 0
k V A
L o g 1 P
19/01-17:01:00
While recording, press key F3 (Sys) to open the drop-down
menu shown in the screen to the side. At each subsequent
pressure of key F3, the cursor will scroll through the available
items, as follows:
• Stop Log: it stops the recording in progress;
• Info: it shows some information about the recording in
progress;
• Esc: it closes the drop-down menu.
By pressing key F4 (OK), the selected item is confirmed.
Mod Par Sys OK
A C 5 0 . 0 H z
2 1 . 4 7
k W
7 . 6 8
k V a r i
2 2 . 9 0
k V A
L o g
19/01-17:01:00
On the right, an example of the screen which is displayed when
the item Info is selected. It shows:
• Start: starting date and time of recording;
• Int. Period: the integration period set (see par. 5.2.3);
• N. Periods: number of periods recorded;
• Auton.: memory autonomy expressed in days/hours.
Pressing key F4 (Esc) goes back to the parameter measuring
screen.
Esc
S t a r t :
19/01-17:01:00
I n t . P e r i o d : 1
N . P e r i o d s : 0 0 0 2 5
A u t o n : 0 0 d / 0 2 h
19/01-17:01:25
5.6.1.2. On-line
Upon confirming the “On-line” item, the instrument sets to
Bluetooth transmission mode; the display shows the message
“Onl.”.
Keys F2 (Par) and F4 (Fnz) are active, which give the possibility
of displaying the parameters or enabling the functions seen in
the previous paragraphs.
Mod Par Sys Fnz
A C 5 0 . 0 H z
2 1 . 4 7
k W
7 . 6 8
k V a r i
2 2 . 9 0
k V A
O n l . . 1 P
19/01-17:00:35
WARNING
When an on-line transmission is in progress, if the selector switch of the
clamp is moved to any other position, the transmission shall be interrupted.
Stop Log
Info
Esc