HT instruments QUICKLAN6055 - Manual (Page 12)

QUICKLAN 6055
EN - 11
8. SERVICE
8.1. WARRANTY CONDITIONS
This instrument is guaranteed for one year against material or production defects, in
accordance with our general sales conditions. During the warranty period the manufacturer
reserves the right to decide either to repair or replace the product.
Should you need for any reason to return back the instrument for repair or replacement
take prior agreements with the local distributor from whom you bought it.
Do not forget to enclose a report describing the reasons for returning (detected
fault).
Use only original packaging. Any damage occurred in transit due to non original packaging
will be charged anyhow to the customer.
The warranty doesn’t apply to:
 Accessories and batteries (not covered by warranty).
 Repairs made necessary by improper use (including adaptation to particular
applications not foreseen in the instructions manual) or improper combination with
incompatible accessories or equipment.
 Repairs made necessary by improper shipping material causing damages in transit.
 Repairs made necessary by previous attempts for repair carried out by non skilled or
unauthorized personnel.
 Instruments for whatever reason modified by the customer himself without explicit
authorization of our Technical Dept.
The contents of this manual may not be reproduced in any form whatsoever without the
manufacturer’s authorization.
Our products are patented and our logotypes registered. We reserve the right to
modify specifications and prices in view of technological improvements or
developments which might be necessary.
8.2. SERVICE
Shouldn’t the instrument work properly, before contacting your distributor make sure that
batteries are correctly installed and working, check the test leads and replace them if
necessary. Should the instrument still operate improperly check that the operation
procedure is correct and conforms to the instructions given in this manual.
If the instrument is to be returned to the after-sales service or to a dealer transportation
costs are on the customer’s behalf. Shipment shall be however agreed upon. A report
must always be enclosed to a rejected product stating the reasons of its return. To ship the
instrument use only the original packaging material; any damage that may be due to no-
original packing shall be charged to the customer.