Safety precautions and procedures, Caution – HT instruments QUICKLAN6055 User Manual

Page 3

Advertising
background image

QUICKLAN 6055

EN - 2

1. SAFETY PRECAUTIONS AND PROCEDURES

CAUTION

For your own safety as well as that of the apparatus you are recommended to
follow the procedures described in this instruction manual and carefully read
all the notes preceded by the symbol

. No compliance with the CAUTIONS

and/or Instructions may damage the apparatus and/or its components or injure
the operator.


1.1. PRELIMINARY

INSTRUCTION

 Read this instruction manual and the instrument’s one before starting use.

 Any instruction preceded by the caution symbol must be observed in order to avoid

accidents or damages.

 Check that battery has been correctly placed.

 Only qualified personnel practicing applicable safety precautions must use this product.

 Do not effect any measurement under conditions beyond the limits specified in this

manual.

CAUTION

Connect the tester only to inactive cables. Connection to active telephone
lines and networks may damage the instrument.


1.2. DURING

USE

Read carefully the following recommendations and instructions:

CAUTION

If the display shows the symbol “

” interrupt testing and replace batteries.

Never replace batteries while the instrument is connected to conductors.


 Do not use the instrument if damaged.

 Do not use the instrument outdoor.

 Do not perform measurements under environmental conditions beyond the limits

specified in § 7.3.1.

 Do not expose the instrument to water splashes.

1.3. AFTER

USE

 After using the instrument switch it off.

 Remove batteries if you expect not to use the instrument again for a long period.

Advertising