HT instruments THT70 - Manual (Page 29)

THT70
EN - 27
Setting the alarm on measurement
1. Touch the icon “ ” of item “Alarm”. The following screen appears on the instrument's
display:
Fig. 40: Setting the alarm conditions on measurement
2. The parameters whose field is included within the symbols “<” and “>” can be set by
the user.
 Target  It allows selecting one of the 3 measuring cursors (see § 5.2.2.1) found
on the instrument to which to associate the alarm condition on temperature
measurement. Possible options: Curs. 1, Curs. 2 or Curs. 3
 Mode  It allows defining the type of alarm threshold according to temperature
measurement. Possible options: Lower, Higher, Same
 Temp.  It allows setting the value of the temperature threshold associated to the
selected mode. Measuring range: -20°C
 400°C