General statistics – Allied Telesis AT-2916SX User Manual

Page 33

Advertising
background image

Advanced Control Suite User’s Guide

33

Note

If an adapter is disabled, team statistics are not displayed.

Figure 8. Statistics Tab

General Statistics

Definitions of the general statistics parameters are provided below.

ˆ

Frames Tx OK. A count of frames that are successfully transmitted.
This counter is incremented when the transmit status is reported as
Transmit OK.

ˆ

Frames Rx OK. A count of frames that are successfully received
(Receive OK). This does not include frames received with frame-too-
long, frame check sequence (FCS), length or alignment errors, or
frames lost due to internal MAC sublayer errors. This counter is
incremented when the receive status is reported as Receive OK.

ˆ

Directed Frames Tx. A count of directed data frames that are
successfully transmitted.

ˆ

Multicast Frames Tx. A count of frames that are successfully
transmitted (as indicated by the status value Transmit OK) to a group
destination address other than a broadcast address.

ˆ

Broadcast Frames Tx. A count of frames that were successfully
transmitted (as indicated by the transmit status Transmit OK) to the
broadcast address. Frames transmitted to multicast addresses are not
broadcast frames and, therefore, are excluded.

ˆ

Directed Frames Rx. A count of directed data frames that are
successfully received.

ˆ

Multicast Frames Rx. A count of frames that are successfully
received and are directed to an active nonbroadcast group address.

Advertising