In-Situ Level TROLL 400/500/700/700H Operators Manual - Manual (Page 33)

1-800-446-7488 33 www.in-situ.com
Install the Software
Win-Situ 5 Software
Install Win-Situ 5 Software from the In-Situ software/resource CD or from the In-Situ
website. Click the Win-Situ 5 link, and follow the instructions to install Win-Situ 5 to your
local hard drive.
USB TROLL Com Drivers
If you are using a USB TROLL Com Communication Device, be sure to select the
option "Install USB TROLL Com Drivers" during the Win-Situ 5 installation. Two drivers
will be loaded to your hard drive, one for the USB TROLL Com, one for the USB
TROLL Com serial port.
Win-Situ Mobile Software
Win-Situ Mobile provides the features and functions of Win-Situ 5 on a field-portable
platform. The RuggedReader can be shipped with the software already installed.
To update or reinstall Win-Situ Mobile use the following procedure.
1. Install the desktop component of Win-Situ Mobile on a PC from the CD or website.
The desktop component is called the Win-Situ Software Manager, and is needed to
install Win-Situ Mobile on the RuggedReader.
2. Click the Win-Situ Mobile link and follow the instructions to install the Win-Situ
Software Manager to your local hard drive.
If using Windows 7, ensure that Windows Mobile Device Center is
installed. If using an operating system prior to Windows 7, ensure
that Microsoft ActiveSync is installed on the desktop or laptop PC
and a Guest connection or partnership has been established
between the computers.
3. Connect the RuggedReader to the PC, establish a connection in Microsoft
ActiveSync, open the Win-Situ Software Manager, and follow the instructions to
install Win-Situ Mobile on the RuggedReader.
Win-Situ Sync Software
To synchronize log files from the RuggedReader to a PC after collecting data in the
field, install Win-Situ Sync from the CD or website.