In-Situ Level TROLL 400/500/700/700H Operators Manual - Manual (Page 16)

1-800-446-7488 16 www.in-situ.com
Configuring Depth and Level for PLC or Data Logger
When you configure level using the Sensors tab, the settings are stored in the
instrument and are available for use in Modbus, SDI-12, or 4-20 mA analog
communication. A different configuration can be selected when you set up a log.
1. Connect the instrument to the software.
2. Click the Sensors tab .
3. Select the level/pressure sensor and click the Configure button. The
Sensor Setup window appears.
4. In the Sensor Setup window, select the Level parameter, then click Configure The
Level Setup Wizard opens.
5. In the Level Setup Wizard, select the options you want. For more information, view
the Help in the Win-Situ 5 Software.