In-Situ Virtual HERMIT Tutorial User Manual
Page 13
Advertising
Getting Started
13
1. After selecting the Search option, click the Next (arrow) button. The wizard will
prompt you for the serial port and the number of TROLLs to configure.
• If you do not know the serial port that the TROLL Net Hub is plugged into,
then use the first option to search on all ports. This can take some time.
• If you do know the serial port that the TROLL Net Hub is plugged into, then
select it to reduce the search time.
• Tell the software how many Level TROLL 700s to search for so that it knows
when to stop searching.
2. Click Next to activate the search window and automatically start searching for
your connected TROLLs.
Advertising