Jenway 4510 User Manual
Page 13
Advertising
3.2.6 Baud Rate
For full details relating to serial protocol refer to Section 6 of this manual.
The display will show:
The secondary display will show BAUD and will then scroll SERIAL PORT BAUD RATE after 10
seconds.
Select the required baud rate (9600 or 1200) using the Up/Down keys which toggle between the
values. The data bits and parity will automatically adjust as the baud rate is selected.
The Left/Right arrow keys and the CAL/CLR key have no function during this set up.
Symbol will flash while adjustment is being made.
To accept the selected baud rate, press the STO key. The symbol will disappear and the secondary
display will momentarily show SAVED and the instrument will return to the MODE menu.
451 050/REV A/03-03
10
Advertising