KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 14)

7
4.3 ON/OFF
1. Getting started
The LCD is displayed below for reference:
2. Shut down
Press and hold 【POWER】for more than 2 seconds in any mode, and the instrument will turn
off automatically.
4.4 Keypad Operation
Keypad operations include the keypad on the control panel as well as the switches on the
base.
The keypad on the control panel is shown below. When a keypad turns gray in the illustration
on the screen, that particular function is invalid.
z MOVE: Change an option on the current mode.
z ADJ: Change the current value.
（ 1）Press【POWER】for a while.
（ 2）Then you enter into the main interface as shown in the left
figure.
MOVE/ADJ/SAVE
MOVE/ADJ
SET/MENU/OK
ESC/START/STOP/BACK/EXIT