AL Tech Portable MPEG Player - Manual (Page 10)

14) Type “ exit ” command at “ C:\WINDOWS> ” and
press [Enter] for returning to windows screen.
15) Unplug the Mpeg4 Player and plug again. New
volume will be appeared at [My Computer]. Click
mouse right button at the new volume and select
[Format].
1.2.2 Windows 2000 1.2.2 Windows 2000
3) If the [Disk Signature and Upgrade Disk Wizard] is
started, click Next to progress for finishing the wizard.
If this wizard not started, right click the left area of
unallocated drive at no. 4 figure, and start the wizard.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the Unallocated Drive. And
then, click [Create Partition].
1) Connect Mpeg4 Player to PC via USB cable.
(If not detected, plug power cable of Mpeg4 Player)
2) Select [Start → Settings → Control Panel →
Administrative Tools → Computer Management
→
Disk Management] on Windows.
Right Click for
starting Disk
Wizard.
9