AL Tech Portable MPEG Player - Manual (Page 19)

2.1.2 Connect Audio Cable
Mpeg4 Player supports 2 type of audio output; “Stereo, Coaxial”. Use audio connection that your TV or Audio set
supports. Do not connect USB cable when connecting TV.
•Coaxial: Digital 5.1 Ch. •
: Connect to IR/5.1 jack of Mpeg4 Player. •Stereo•
: Connect to AV jack of Mpeg4 Player.
White Yellow Red
Supplied
Coaxial
Cable
Supplied
AV Cable
Connect to Coaxial jack of Amplifier
or Receiver.
Connect to Audio Jacks of TV
White = L (Left) Audio Input / Red = R (Right) Audio Input
9 When you can not hear sound after connecting Coaxial Cable, you have to change audio setup of Mpeg4 Player as Encoded
Digital. See “2.2.2 Audio Setup”
2.1.3 Connect External IR Receiver
External IR Receiver is optional package, not primary one.
Connect the external IR receiver to IR/5.1 jack of Mpeg4 Player instead of Coaxial cable. External IR Receiver and
Coaxial cable are not used at the same time.
18