KROHNE UFM 610P EN - Manual (Page 25)

25
3.5.5 Graph as axis maximum
The Y axis defaults to the maximum flow achievable with the sensors that have been selected from the data entered, but can be
adjusted to increase the resolution of the graph.
This example shows the flow is constantly at maximum flow rate.
The following example shows the same flow rate but with the Y-
axis value having been doubled.
3.5.6 Download log
If the data is being downloaded to Windows 95 and Windows 3.1, then this has to be set up before the user selects the range of
data to download, then go to the logger menu, move cursor to Download log and press ENTER.
If only certain blocks need to be downloaded, then this can be achieved by using the scroll keys.
Scroll down to First block to Download, press ENTER then select the block you wish to start from. The same procedure should
be followed to select the Last block to download. When both of these are selected scroll back up to Download range to RS232
and press ENTER.
Y AXIS
Y
max.
+ flow
Y AXIS
Y
max.
+ flow