ADT Security Services Focus 200 Plus - Manual (Page 36)

– 36 –
System Programming (cont’d)
5. Press Delete to delete the User Name, ID code, Burglary group access,
privilege levels, card/key code, and cancel date. Note: If Delete is not
displayed, contact ADT for removal of this user from the system.
6. Press Continue to display the User Selection Menu again.
To delete other users, repeat steps 4 through 6.
7. Press Quit to display Action Menu 4.
Assigning or Changing User Access
Use the following steps to assign or change a user’s access to burglary
groups, privilege levels, ID code, card/key code, and/or code and card cancel
date.
1. Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can change names."
2. Press the More button three times to display Action Menu 4.
3. Press ID codes to display the User Selection Menu. Note: If ID codes is
not displayed, you do not have privilege level of "Can change names."
Consult your manager or ADT Service Representative.
User Selection Menu
 ? User
Name

  User xxx Delete  
  Prev Change 
  Quit
Next     
4. Press Prev or Next to display the specific user name and user number to
be changed or added.
Hint: To go directly to the user, enter the one- to three-digit user number
on the numeric keypad.
5. Press Change to display the desired user name.