Ayre Acoustics AX-7 - Manual (Page 5)

Connections and
Installation
The Ayre AX-7 is easy to hook up and use. The
following guidelines will ensure that the installation
goes smoothly.
Location
Do not stack the Ayre AX-7
directly with other components,
as this may restrict the air
flow or induce hum into the
audio circuitry.
A good location for your integrated amplifier is near
eye level in an open-backed cabinet or on a shelf.
The Ayre AX-7 produces a moderate amount of heat
during operation. Be sure to provide at least three
inches (75 mm) of air space above the amplifier.
It is important to maintain an adequate
supply of air flow to avoid overheating
the amplifier.
The infrared beam will also
travel through glass.
The receiver for the infrared remote control is
mounted behind the display lens on the front panel.
A direct line of sight from the listening position
will ensure the maximum range. However, the beam
will also reflect off of most wall surfaces with a
reduced range.
3