Alloy Computer Products WLF2454AP-S - Manual (Page 6)

Alloy Wireless 802.11g User’s Guide www.alloy.com.au 5
4 Web Management Settings
START UP & LOGIN
In order to configure the Wireless 11g AP Router, you must use your web browser and manually enter
http://192.168.1.1 into the Address box and press Enter. The Main Page will appear.
In order to configure the Wireless 11g AP Router, you must enter the password into the Password
box and leave the User Name blank. The default password is “admin”.
Once you have logged-in as administrator, it is a good idea to change the administrator password to
ensure the Wireless 11g AP Router is secure. The Security Settings section described later in this
manual describes how to change the password.
Once you have entered the correct password and logged in, the screen will change to the Setup page
screen.
TURN ON POWER SUPPLY
A ‘Quick’ power cycle can cause the AP’s firmware to become corrupt. When powered on, be careful
not to power the unit off again for at least 5 seconds, while data is being written to the flash.