Alloy Computer Products WLF2454AP-S - Manual (Page 9)

Alloy Wireless 802.11g User’s Guide www.alloy.com.au 8
LAN IP Address and Subnet Mask: This is the Router's IP Address and Subnet Mask as seen on
the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet Mask.
Wireless: This section provide the Wireless Network settings for your WLAN
2.4GHz Settings
SSID: The service set identifier ( SSID ) or network name. It is case sensitive and must not exceed 32
characters, which may be any keyboard character. You must select the same SSID for all the APs that
will be communicating with mobile wireless stations.
Domain: Please select the correct Domain for your physical location. ETSI is recommended.
Channel: Select the appropriate channel from the list provided to correspond with your network
settings. You should assign a different channel for each AP to avoid signal interference.
WEP: Make sure that all wireless devices on your network are using the same encryption level and
key. WEP keys must consist of the letters "A" through "F" and the numbers "0" through "9."
* Click Apply to save your settings.